SFDA Series – Bacteria Removal Filter Hollow Fiber Element

Bacterial capture performance: LRV ≧ 9  FDA / Food Sanitation Law compliant material is used  Fluid contact part: Resin / rubber channel part lubricant uses NSF-H1 grade  Contributes to “HACCP” and “FSSC22000” certification!  Filtration degree: 0.01 μm (collection efficiency 99.99%) Initial pressure drop: 0.03 MPa (inlet pressure 0.7 MPa, maximum flow rate) Flow rate: 500 L / […]

Read More...

Universal Robots Virtual Showroom – Pick and Place

Automate precise pick-and-place operations Pick-and-place operations involve repetitive, typically precise motions to move a part from one location and place it in another. For humans, this monotonous work can lead to repetitive injuries, low morale and high turnover, and errors that can impact your bottom line. By automating your pick-and-place processes with a Universal Robots […]

Read More...

Banner Engineering Pick-to-Light for Manufacturing and Assembly

LIGHT GUIDED ASSEMBLY FOR LEAN MANUFACTURING Pick-to-light systems support lean manufacturing initiatives. By reducing the risk of human error in production and assembly processes, pick-to-light is an ideal solution for poka-yoke (error-proofing). Pick-to-light devices visually guide operators to pick the correct parts, in the right quantities and the proper sequence. This reduces errors and defects […]

Read More...

Universal Robots ActiNav for Pick and Place Applications

AUTONOMOUS BIN PICKING FOR MACHINE TENDING APPLICATIONS EASY TO USE ActiNav does not require prior robot programming experience. ActiNav setup is intuitive using the Universal Robots teach pendant, teach by demonstration, and the six-step wizard-guided setup process. ActiNav Autonomous Bin Picking is easy to program with: Intuitive & prompt-based programming: Complete the programming hassle free from […]

Read More...

SMC Vacuum Gripper Unit for Collaborative Robots

Plug and Play with: UR3(e), UR5(e), UR10(e), UR16(e) Operate by Simply connecting 1 compressed air supply tube and an electrical wiring M8 connector. Integrated vacuum ejector, air supply/release valve, pressure sensor and cups Standards: Conforming to ISO9409-1-50-M6 URCap – Plug and Play software incorporated with the teaching pendant.

Read More...

Wireless Tank Level Monitoring

Reduce unplanned downtime and keep production running smoothly by continuously monitoring remote and mobile tanks and totes.  Application: Monitor levels inside storage tanks Challenges: Multiple storage tanks in remote and hard-to-reach locations Solution: K50U Ultrasonic Sensors and Q45U Wireless Nodes paired with a DXM100 Wireless Controller Benefits: Remote monitoring of up to 16 tanks from a central or mobile […]

Read More...

Infographic: 9 Common Machine Safety Devices

Machine Safety Fundamentals Mechanical hazards on machinery typically occur at points of operation, points of power transmission, and other points of machine movement. Safeguarding devices are designed to limit the risk to personnel for accident or injury at these points. In the illustration below, common machine safeguarding devices are used to mitigate multiple points of […]

Read More...

OEE Improved with Banner Engineering Wireless Gateways

Wireless sensors count the inputs and outputs and send the counts to the DXM Controller.  Banner Engineering’s Part Counting Application Banner Engineering’s Wireless part counting application enables LEAN initiatives by providing the ability to measure and analyze OEE metrics of availability, performance, and quality to compare how your process/machine is performing against an ideal state. […]

Read More...

Control Cabinet UPS – WAGO PRO2 Power Supplies

IIoT Ready: Continuous monitoring of all data and values of your system’s power supply Class-Leading Features of PRO 2 Power Supplies Intelligent load management that supplies150% power for 5 s (TopBoost), and up to 600% output current for 15 ms (PowerBoost) Extreme reliability even in adverse conditions. Heat, cold, and altitude have little impact on […]

Read More...

Where can you use wire rope vibration isolators?

Wire rope isolators can be used for motors and fans that produce vibrations onto surrounding structures. They can also be used to control vibration and thermal expansion. They are used for shipping delicate items across the ocean or across town. They isolate vibrations and shock from a truck, shipping vessels, or other vehicles so vibration […]

Read More...