Banner T30R Radar Sensor

The T30R is a long-range sensor that provides reliable detection and position feedback in extreme applications Reliable detection of high-dielectric targets (like metal or large amounts of water) and lower-dielectric materials (such as wood, rock, or organic material) in a wider range of applications Unaffected by rain, wind, snow, fog, steam, sunlight, and an operating […]

Balluff BOS 21M Photoelectric Sensor Family with IO-Link

Red light sensor in rugged metal housings The BOS 21M photoelectric sensor family with IO-Link offers you a variety of application possibilities, including those in harsh industrial environments. That is because their rugged metal housing delivers both IP67 and IP69K protection and Ecolab approval. Photoelectric Sensor Features Highly visible red light for easy alignment IO-Link […]

SFDA Series – Bacteria Removal Filter Hollow Fiber Element

Bacterial capture performance: LRV ≧ 9  FDA / Food Sanitation Law compliant material is used  Fluid contact part: Resin / rubber channel part lubricant uses NSF-H1 grade  Contributes to “HACCP” and “FSSC22000” certification!  Filtration degree: 0.01 μm (collection efficiency 99.99%) Initial pressure drop: 0.03 MPa (inlet pressure 0.7 MPa, maximum flow rate) Flow rate: 500 L / […]

Banner Engineering Pick-to-Light for Manufacturing and Assembly

LIGHT GUIDED ASSEMBLY FOR LEAN MANUFACTURING Pick-to-light systems support lean manufacturing initiatives. By reducing the risk of human error in production and assembly processes, pick-to-light is an ideal solution for poka-yoke (error-proofing). Pick-to-light devices visually guide operators to pick the correct parts, in the right quantities and the proper sequence. This reduces errors and defects […]

SMC Vacuum Gripper Unit for Collaborative Robots

Plug and Play with: UR3(e), UR5(e), UR10(e), UR16(e) Operate by Simply connecting 1 compressed air supply tube and an electrical wiring M8 connector. Integrated vacuum ejector, air supply/release valve, pressure sensor and cups Standards: Conforming to ISO9409-1-50-M6 URCap – Plug and Play software incorporated with the teaching pendant.

Wireless Tank Level Monitoring

Reduce unplanned downtime and keep production running smoothly by continuously monitoring remote and mobile tanks and totes.  Application: Monitor levels inside storage tanks Challenges: Multiple storage tanks in remote and hard-to-reach locations Solution: K50U Ultrasonic Sensors and Q45U Wireless Nodes paired with a DXM100 Wireless Controller Benefits: Remote monitoring of up to 16 tanks from a central or mobile […]

Infographic: 9 Common Machine Safety Devices

Machine Safety Fundamentals Mechanical hazards on machinery typically occur at points of operation, points of power transmission, and other points of machine movement. Safeguarding devices are designed to limit the risk to personnel for accident or injury at these points. In the illustration below, common machine safeguarding devices are used to mitigate multiple points of […]

OEE Improved with Banner Engineering Wireless Gateways

Wireless sensors count the inputs and outputs and send the counts to the DXM Controller.  Banner Engineering’s Part Counting Application Banner Engineering’s Wireless part counting application enables LEAN initiatives by providing the ability to measure and analyze OEE metrics of availability, performance, and quality to compare how your process/machine is performing against an ideal state. […]

GA500 Industrial AC Microdrive

Whether you are installing, wiring, programming, or troubleshooting, the GA500 has features that help simplify the task for you. Features No power programming Intuitive keypad Conformal coated (IEC 60721-3-3: 3C2, 3S2) Up to 30% smaller than the competition Current vector control, open loop Induction motor (IM), permanent magnet motor (PM), or synchronous reluctance motor operation […]

Programmable Stack Light Towers from Banner Engineering

Banner’s Pro Editor software allows users to program device status, colors and animations for control via three discrete inputs. The application-based interface makes it easy to configure a light for a wide range of applications such as displaying machine warm-up time, indicating unique steps in an assembly process, showing distance and position information and communicating […]